What it does
Creates friction against a rotor. Wear pattern can reveal hardware, hydraulic, mounting, or heat concerns.
A component is one possibility inside a larger system. Confirm its inputs, outputs, connections, and any bounded planning context before replacement.
- 01ObserveCreates friction against a rotor. Wear pattern can reveal hardware, hydraulic, mounting, or heat concerns.
- 02Check inputsPower, ground, command, mounting, and conditions
- 03CompareCompare inner and outer wear on both sides / Inspect hardware, slides, boots, hose, and rotor condition
- 04Budget5 currencies · USD / CAD / EUR / GBP / AUD · planning range only
- 05DecideReject or support the component cause
- 06VerifyApply the exact repair and recreate the symptom
Follow the sequence, stop when evidence changes the path, and verify the exact vehicle information before acting.
Where it is located
Location and access vary by platform, engine, drivetrain, market, and installed equipment. Identify the exact component using the vehicle’s service information before disconnecting or removing anything.
Symptoms are clues—not proof
Start with the system symptom and operating conditions. A failed connection, control input, related component, incorrect prior repair, or mechanical condition can imitate component failure.
Use the exact safety procedure
Confirm isolation, support, pressure, temperature, and stored-energy hazards for the vehicle before testing.
Testing focus
Compare inner and outer wear on both sides
Record the result and compare it only with authoritative information for the exact vehicle and test conditions.
Inspect hardware, slides, boots, hose, and rotor condition
Record the result and compare it only with authoritative information for the exact vehicle and test conditions.
Check for contamination and heat evidence
Record the result and compare it only with authoritative information for the exact vehicle and test conditions.
Follow electronic parking-brake and bedding procedures where specified
Record the result and compare it only with authoritative information for the exact vehicle and test conditions.
Replacement boundary
IAR does not publish a universal replacement procedure for this component.
This rounded range is a planning aid for the related service topic after diagnosis. It is not a diagnosis, part recommendation, or quote.